"The Sundance System"
*Equipment for the 21st Century*
"The Sundance System" is specifically designed to bury underground drip irrigation and then perform post- harvest tillage above and beside the buried drip without removing.  The minimum-tillage-minded conventional grower will find "The Sundance System" just as beneficial.

 
disk.jpg (26504 bytes)
Sundance Disk

PATENT NUMBER 4,779,684
*  Disk, rip, and list all in the same pass
*  Exceptional incorporation of crop debris
*  Lends itself to the minimum-tillage strategy
*  Maintains integrity of row, regardless of 
    number of trips
*  Available in 2- through 8- row models
*  3-point linkage mounted (3-point category II 
    or III)

 

tapeinjector.jpg (27118 bytes)
Sundance Tape Injector

PATENT NUMBER 4,637,755/4,447,173
*  Precise burial depth of dripper lines 2 
    through 15 inches, with variations of less
    than 1 inch
*  Available in 1- through 8-row configurations
*  Low horsepower requirements - 150 h.p. 
    for 6-row
*  3-point linkage mounted (3-point category II 
    and III)

 

pullerwidebed.jpg (20869 bytes)
Sundance Puller Wide Bed

PATENT NUMBER 4,779,684
*  Pulls or cuts the root
*  Maintains the integrity of row/bed
*  Effective in killing the plant - tomatoes, 
    melons, tobacco, etc.
*  High-speed operation - low horsepower 
    (3-row/100 h.p., 8-10 m.p.h.)
*  Available in 1 - through 7-row
*  3-point linkage mounted (3-point category II 
    or III)

 

modifieddisk.jpg (29228 bytes)
Sundance Modified Disk

PATENT NUMBER 4,779,684
*  Set up primarily for 30-inch row spacing

 

tapeextractor.jpg (35590 bytes)
Sundance Tape Extractor

PATENT NUMBER 5,297,898
*  Removes soil down to within one or two 
    inches of tape
*  Rips below the tape depth on either side of 
    tape
*  Hydraulically winds spent tape on tapered 
    drum
*  3 point hitch linkage mount
*  Hydraulic operations performed by 
    plugging directly into tractor ports
 *  Available in one or two row configuration 
    only
*  Operation platform standard with auxiliary   
    valve speed controls

 
pullerdoublebed.jpg (17690 bytes)
Sundance Puller Double Bed

PATENT NUMBER 4,779,684
*  Primarily for double bedded crops - lettuce, 
    broccoli, celery, etc.

 

looseringroller.jpg (26003 bytes)
Sundance -Schmeiser Loose Ring Roller


*  Helps to incorporate debris
*  Breaks up clods and firms the ground
*  Available in 2 - through 8-row configurations
*  3-point linkage mounted
*  Can be used as a crust buster

 

rollerbedshaper.jpg (26760 bytes)
Sundance Roller Bed Shaper

*
  Finishing machine for precise bed shaping
*  Firms sides and top of beds
*  Available in 1- through 8-row configurations 
    and larger
*  Roller provides consistent bed shaping
*  3-point linkage mounting

 

widebeddisk.jpg (28362 bytes)
Sundance Wide Bed Disk

*  Disk, rip, and list all in the same pass
*  Exceptional incorporation of crop debris
*  Lends itself to the minimum-tillage strategy
*  Maintains integrity of row, regardless of number 
    of trips
*  Excellent coverage across wide beds (30" - 80")
*  Available in 1- through 8-row configurations
*  3-point linkage mounted (Category II or III)

 

peeloffdisk.jpg (17059 bytes)
Sundance Peel Off Disk

PATENT NUMBER 4,779,684
*  Ideal for flattening beds
*  Low horsepower requirement
*  Available in 2- through 12-row
*  Ideal for cleaning furrows
*  Works well in stubble farming
*  3-point linkage mounted

 

powermulcher.jpg (26886 bytes)
Sundance Power Mulcher

Ideal for incorporation of pre-plant fertilizer  or 
    herbicide
*  Excellent incorporation throughout the top 6"
*  Direct mounting to tractor PTO and 3-pont hitch
*  Available in 2- through 8-row configurations
*  Can be ordered with tank and spray capabilities

 

puller.jpg (12897 bytes)
Sundance Puller

PATENT NUMBER 4,779,684
*  Pulls or cuts the roots
*  Effective in killing the plant - cotton, corn, 
    tomatoes, melons, etc.
*  High speed operation - low horsepower 
    (6-row/100 h.p., 8-10 m.p.h.)
*  Available in 2- through 12-row and larger
*  Advantageous in Minimum-tillage practices

 


 

Home Page | Contact Us | Products | Dealer List

Another site by Tom Rowe & Associates Copyright © 2000